Maintenance, “How-to” guides, and troubleshooting (excellent for SEO traffic).
For a 6 kW fiber laser system operating at 30% duty cycle, you need a chiller with a minimum cooling capacity of 1.8 kW (6,144 BTU/h) to handle the waste heat. However, we recommend a chiller rated for at least 2.4 kW to provide a 33% safety margin for peak loads and ambient temperature fluctuations
The recommended flow rate of assist gas for optimal laser cutting performance typically ranges from 10 to 20 liters per minute (L/min), depending on the material thickness and type. A shielding gas with a purity level of at least 99.995% is essential to ensure high-quality laser cuts, as lower purit
In the high-stakes world of metal fabrication, selecting the right laser technology isn't just about cutting – it's about strategic reliability and long-term...
The factory floor of 2025 looks nothing like it did a decade ago. When Tesla ramped its Gigafactory Berlin production lines, it didn’t install more stamping presses — it deployed fiber laser cutting systems that process battery enclosures at speeds that would have seemed impossible in 2015. Me
Industrial laser cutting employs three distinct process modes—fusion cutting, oxidation cutting, and sublimation cutting—each optimized for specific material types, thickness ranges, and edge quality requirements. Selecting the appropriate mode for each application directly impacts cutting speed, edge quality, assist gas…
Our phased array ultrasonic testing (PAUT) system can consistently detect surface and sub-surface cracks with a width as small as 50 microns (0.05 mm) in Inconel 625 clad layers up to 5 mm thick, assuming a signal-to-noise ratio of at least 6 dB. We can detect and map porosity down to 0.2% of the cl
With a properly configured coaxial nozzle, you can achieve a powder utilization efficiency of up to 85% for standard cladding applications, whereas lateral nozzles typically deliver 60-70% efficiency. For a specific example, on a 3 mm track width, a coaxial nozzle wastes approximately 15% of powder