Maintenance, “How-to” guides, and troubleshooting (excellent for SEO traffic).
The factory floor of 2025 looks nothing like it did a decade ago. When Tesla ramped its Gigafactory Berlin production lines, it didn’t install more stamping presses — it deployed fiber laser cutting systems that process battery enclosures at speeds that would have seemed impossible in 2015. Me
Industrial laser cutting uses three process modes: fusion cutting with nitrogen at 10-25 bar for clean, weld-ready edges; oxidation cutting with oxygen at 0.3-2.0 bar, where the exothermic reaction contributes roughly 60% of cutting energy for faster speeds on mild…
Our phased array ultrasonic testing (PAUT) system can consistently detect surface and sub-surface cracks with a width as small as 50 microns (0.05 mm) in Inconel 625 clad layers up to 5 mm thick, assuming a signal-to-noise ratio of at least 6 dB. We can detect and map porosity down to 0.2% of the cl
With a properly configured coaxial nozzle, you can achieve a powder utilization efficiency of up to 85% for standard cladding applications, whereas lateral nozzles typically deliver 60-70% efficiency. For a specific example, on a 3 mm track width, a coaxial nozzle wastes approximately 15% of powder